Products > Liquid-Handling & Life Science Material > Dispenser & Accessoires > Bottletop-dispensers VITLAB® simplex2

Bottletop-dispensers VITLAB® simplex2

Logo Vitalab

A dispenser is used for dispensing fluids considering the following physical limits:

  • temperature from 15 to 40 °C for apparatus and liquids
  • density up to 2.2 g/cm3
  • vapour pressure up to 600 mbar
  • viscosity up to 500 mm2/s

 

  • high-quality materials (PTFE, PFA, FEP, borosilicate glass, platinum-iridium) ensure high chemical resistance against most acids, solvents and bases
  • quick, easy and precise volume adjustment
  • a positive displacement plunger with a PFA seal minimizes the crystallization of liquids and thus the clogging of the plunger
  • with variable volume
  • scale easily readable
  • no drops after tube has been capped
  • completely autoclavable at 121 °C (2 bar. T max. 20 min)
  • DE-M marked
  • simple-to-use calibration function to meet the requirements of testing-apparatus monitoring
  • individual serial number on each dispenser
  • detailed instruction manual and quality certificate attached
  • standard equipped with GL 45 thread
  • unscrewable ejector valve
  • supplied with 3 resp. 5 thread adapters* made of PP, intake tube and mounting tool
Cat. No. Volume Graduation A** ≤ ± % A** ≤ ± µl CV** ≤ % CV** ≤ µl Unit
5330001 0.2-2.0 ml 0.05 ml 0.5 10 0.1 2 1
5330004 0.5-5.0 ml 0.10 ml 0.5 25 0.1 5 1
5330005 1.0-10.0 ml 0.20 ml 0.5 50 0.1 10 1
5330006 2.5-25.0 ml 0.50 ml 0.5 125 0.1 25 1
5330008 5.0-50.0 ml 1.00 ml 0.5 250 0.1 50 1
5330009 10.0-100.0 ml 1.00 ml 0.5 500 0.1 100 1

* Nominal capacity 1-10 ml:
  with adapters GL 25, GL 28, GL 32, GL 38, S 40 and telescope filling tube of 125-240 mm length

  Nominal capacity 25-100 ml: 
  with adapters GL 32, GL 38, S 40 and telescope filling tube of 170-330 mm length

** Accuracy (A) and coefficient of variation (CV) acc. to DIN EN ISO 8655-5 

Go back